BEHAbelt
NEWS


SLIP-FREE CONVEYOR BELTS FOR POSITIVE DRIVE


09.02.2021

The positive-driven AT5 conveyor belts from BEHAbelt enable slip-free traction, even with the smallest pulley diameters of only Ø 18 mm. This means that even conveyor sections with the smallest transfers can now be utilized with a slip-free belt solution.
In combination with a maximum belt width of up to 700 mm, the new product series from BEHAbelt represents a new product solution which once again shifts the previous limits of the possible applications of positive-driven belt solutions on the market.


WELDING TECHNIQUES FOR BELT EDGES


11.01.2021

Belt edge profiles are used to stabilise and guide curved belts.
Usually, the curved belt is picked up via a profile groove and then sewn and/or glued to the belt edge.

A challenge in belt finishing is always the design of the belt edge joint, which is usually a potential weak point with regard to the service life of the belt. For this purpose, we have developed a special moulded shoe which, in conjunction with a hot press, completely welds the belt edge profile in the joint.

The consistent and high welding quality thus enables a more robust design of the belt edge joint in the sense of a generally better system availability. The special moulded shoe is used in combination with a hot press to completely weld the belt edge profile in the joint.


PU SHEET MATERIAL (4-8mm)


12.10.2020

For use on conveyor belts as a welded-on conveyor belt profile FDA (cleat) and
as aprons, impact protection, tension belts, dampers, covers, seals, etc.
in blue and black versions in Shore 84A and 95A.


HOT PADDLE WITH GUIDE CLAMP FOR FLAT BELT STRIPS


22.05.2020

We now offer our best-selling welding tool EErgo with a 90mm paddle. The heating time is only approx. 5 minutes. With this, up to 80 mm wide flat strips can be reliably butt welded. Use the FZ02/3F guide clamp for this purpose.


GUIDING UNIT FOR OVERLAP WELDS


21.02.2020

Quickly connect reinforced profiles with the new guide clamp FZ03/1 and the welding paddle EErgo-Z. The special design of this tool enables a repeatable and uniform contact pressure over the entire welding surface of the profile and therefore ensures a durable joining quality.


PJ4 WELDABLE V-RIBBED BELTS


12.11.2019

Another novelty in our portfolio are conveyor belts consisting of 2 material components. This capability enables us to manufacture various products with different surface structures. In order to support your application even better, we are now offering different degrees of hardness combined in one belt. We are happy to be the partner of choice for optimizing your machinery design.


PJ4 WELDABLE V-RIBBED BELTS


16.09.2019

Weldable BEHAbelt PU-Plus V-ribbed belts ‚PJ‘ are used where standardized endless manufactured belts don‘t fit on the existing ­design (centre distance).

Now we are offering V-ribbed belts also in PJ4 ­version. All 3 types (PJ2, PJ3 and PJ4) are available in orange ­material with special flexibility under low temperatures and ultramarine blue PU-Plus versions for mechanically demanding applications.

We supply these belts in rolls by the meter, which can be cut to the ­final dimension and welded independently on site. Alternatively, you can also use our fabrication service for endless welded belts.


METAL AND X-RAY DETECTABLE PROFILES AND CONVEYOR BELTS


10.04.2019

Many recalls due to contaminations in food can be reduced or avoided by using metal and X-ray detectable conveyor belts and profiles.

After several months of development in our laboratories and cooperation with leading manufacturers of metal and X-ray detectors, we are pleased to present our metal detectable product line PUsafe, with improved material composition.

NEW thanks to improved recipe
· 30% better detectability
· Optimized surface quality
· also detectable by X-ray technology

Round belts and V-belts, Conveyor belts, accessories for conveyor belts (V-guides, Sidewalls, Cleats, Belt edges)


WELDING UNIT HS400&800 FOR CONVEYOR BELTS


05.02.2019

HS400 and HS800 are specially developed tools for butt welding of conveyor belts up to 400 and 800mm wide respectively.

The sophisticated design with positioning aids and stoppers ensures highly accurate repeatability in the welding processes. The robust and handy design of the individual components is complemented by the control unit, which ensures precise temperature control.

more information


ELASTIC MONOLITHIC CONVEYOR BELTS


31.7.2018

Where the advantage of the monolithic elastic belt design will improve the food safety and/or customer handling, this will influence actual and future machinery designs and replace continuously traditional conveyor belts.
In this 20-page brochure you will learn everything important about the properties, materials and applications of monolithic conveyor belts.

Download the brochure here.

We are happy to send you printed copies free of charge.
Order now for free >>


Supergrip

SUPERGRIP STRUCTURE


6.6.2018

Embossed Supergrip (ESG) is a common structure used in logistics and packaging applications. This belt is also available in 360mm width, made of food compliant, hydrolysis resistant material and available in two different hardness grades, PU75A and PU95A. The Supergrip embossing is an excellent solution for products in cardboard or plastic boxes.

We will be pleased to send you free samples.

Order now for free >>


Sawtooth

SAWTOOTH STRUCTURE


9.5.2018

The new 360mm wide PU75A product with Sawtooth embossing (EST) is made of a hydrolisis resistant food compliant Polyurethan. The structure is ideal for conveying boxes or unwrapped food when good grip is required. The Sawtooth embossing still allows good cleanability of the belts e.g. by brushing or spray bars that are integrated in the conveyor system.

We will be pleased to send you free samples.

Order now for free >>


weldable roundbelts and v-belts

ROUND- AND V-BELTS – OVERVIEW, APPLICATIONS AND FEATURES


5.4.2018

Many products large and small are manufactured, packaged and shipped on highly automated industrial processing equipment. Efficient and reliable material flow through the manufacturing processes requires a wide range of conveying solutions. BEHAbelt specializes in designing and extruding a high quality line of thermoplastic profiles. In this new brochure you will learn compact facts about belt profiles and their properties. In addition, we have created compact summary tables per product group.

Download the brochure here.

We are happy to send you printed copies free of charge.
Order now for free >>


BEHAbelt BECOMES COMPANY MEMBER OF EHEDG


7.2.2018

Many of our extruded belts and profiles are installed in food processing machines and have direct contact to unwrapped food. This requires utmost consideration of the specific requirements and regulations. The EHEDG (European Hygienic Engineering and Design Group) is an industry association with focus on safe and hygienic processing of food. Therefore, BEHAbelt decided to join this network of international equipment and component suppliers. This enables us to exchange with industry leaders and innovators in dedicated working goups about industry trends and new solutions. Our aim is to develop and supply new belting solutions, which support the production of safe and high quality foodstuff.


MONOLITHIC CONVEYOR BELT WITH SPIKES (SP)


26.10.2017

Conveyor belt with grip for the food industry.

Conveyor belt especially for cutting and portioning lines in poultry, fish or meat
Practical design:
The arrangement of the spikes is designed such that grooved tensioning rollers can be used.
In addition, the spike spaces (6 mm) provide enough space for cutting and butt welding.

The conveyor belt is FDA / EC compliant and available in 2 or 3mm thickness.
We will be pleased to send you free samples.

Order now for free >>


MONOLITHIC CONVEYOR BELT WITH LONGITUDINAL GROOVES (LGB)


17.10.2017

The new longitudinal groove design is additionally provided with our unique “MICROclean” surface.

For food industry (e.g. Cheese, Meat)
It reduces all kinds of undesirable sticking and adhesion effects on the belt surface combined with an improved cleanability.

We will be pleased to send you free samples.

Order now for free >>


MONOLITHIC CONVEYOR BELT WITH TRANSVERSAL GROOVES (TGA)


8.10.2017

The new transversal groove design of BEHAbelt combines excellent grip with a gentle product contact.

For food industry (e.g. Cheese, Meat)
Thanks to the open transversal design, cleanability is no more a problem, compared to most other positive structured conveyor belt surfaces.
We will be pleased to send you free samples.

Order now for free >>


MOBILE FRICTION WELDER
RS02 CORDLESS FOR PU-PROFILES


24.4.2017

The proven and patented RS02 friction welding machine is now available as a battery-operated version.

Reduce downtimes in the production process.
Due to the small size and the networkless operation, the RS02 can be used directly in the system. The RS02 does not require long heating or set-up times and is welded within seconds.

Thanks to exchangeable clamping jaws, the machine is suitable for welding profiles from Ø 6mm and V-profiles from 6x4mm upwards.

learn more >>


COGGED V-GUIDES


24.4.2017

Flexible cogged V-guides with excellent weldability on PU belts and most PVC belts.

learn more >>


MORE GRIP:
PU40A AND PU50A


16.4.2017

Our most recent extremely soft coating materials PUgrip and PUtex soft offer excellent take-away properties.

learn more >>


ANTISTATIC AND UV-C RESISTANT CONVEYOR BELTS FOR THE FOOD INDUSTRY


8.4.2017

UV-C resistant belts complement the new portfolio thus enabling long service lives of monolithic conveyor belts in the food industry for sterilization of the strip surface using UV-C light.
Antistatic belts for the food industry are used if static charging of the strip surface might cause disturbances of sensitive electronic components and assemblies, as weighing units for example.


CAN CABLES – SPECIAL ROUND BELTS FOR THE CANNING INDUSTRY


28.3.2017

Our Can Cable product range offers a broad range especially for the canning industry.
We offer appropriate profiles for almost all conveying conditions in this segment.

learn more >>


SPIKES AND NIPPLES –
FDA/EC COMPLIANT


20.3.2017

New belt surfaces designed for a gentle or high grip handling with the conveyed products up to a belt width of 750mm.

learn more >>


FLAT BELT STRIPES FOR SIDEWALLS


12.3.2017

BEHAbelt offers flat belt material cut to width and length, suitable for welding various height and thickness sidewalls directly to the conveyor belt.
The special flat belt material has excellent weldability with ­polyurethane and most PVC types.

learn more >>


GUIDE CLAMP FZ02/3F FOR FLAT BELTS


8.3.2017

For mobile welding of flat belt strips up to the width of 60 mm
This special version based on the proven design of the FZ02 series enables precise butt welding of belts over 1 mm belt thickness.

learn more >>


CONVEYOR BELT UP TO 4 MM MATERIAL THICKNESS


27.2.2017

BEHAbelt now enhanced its flat belt portfolio to 4 mm material
thickness from formerly 1 – 3 mm.
This enhancement now allows using still more rugged monolithic belts for particularly demanding applications.


BLACK INDUSTRIAL BELTS


25.2.2017

From now on a special PU belt product line of black design is available for using belts in the most diverse industrial fields for impact protection, cushioning, covering, etc.
The black industrial belt with thicknesses of 2/3/4/6/8 mm is available in two hardness degrees: Shore 85A and Shore 95A.
The surface comes with smooth and mat design on one side and a fine structure on the other, thus allowing for versatile application of the belts.


SLIGHTLY ROUGHENED BELT SURFACE


20.2.2017

New belt surface with extra fine texture for gentle conveying but also non-slip transport of foodstuff.
Excellent release properties of the products at the belt transfer points. Improved cleaning of the belt surface using wipers compared to using negative profiles.

learn more >>


TRANSPARENT CONVEYOR BELTS FOR THE ­DETECTION OF TRANSPORT GOODS


8.2.2017

Transparent conveyor belts with smooth and slightly roughened surface combinations in Shore 85A enable optimum use for detection of the transport goods during conveying.
The smooth glossy surface provides adequate adhesion to prevent slipping. The slightly roughened surface enables saving slide charging supported by the belt. In addition, the belt has sufficient transparency.