Hotpress HP01

Hotpress HP01:		Related items:
The handy and double-sided heated Hotpress HP01 with programmable controller is especially suitable for accurate joining of PU- and Polyester belts. The removable mold stands out the new Hotpress HP01 as well. Through the possibility of rapid cooling via water or compressed air allows for cooling-off times to decrease.		Delivery Program 2010 US
		Product Overview 2010 US
		Flyer Hotpress HP01
		Video HP01

Advantages of the HP01: User-friendly and simple to operate Reduces operator errors through a fully automatic controlled welding process A 100% perfect weld every time no matter if the surrounding temperature is low or high Optimum welding accuracy in just minutes Different types of welds possible - Overlap welding (Round belts with reinforcement) - Butt welds - Angle welds The small size of the HP01 press makes it easy to use in confined spaces Logging of every dataset allows for quick reference for future welds
Scope of delivery HP01 press Controller unit HP01 Mold (specific according to profile)	Accessories Cooling unit 2 long cooling hoses 3 short cooling hoses

Accessories
Joining Set RH-2 for belts with steel reinforcement including: 1 pc. Crimping tool RH-2 30 pcs. Polyester sleeves à 8cm 100 pcs. AL crimps 2,5 mm Article No: FBWZRH2SET1



1. Join the steel reinforcement with two crimps and crimp them with the crimping tool.	2. Cut the length of the Polyester sleeve according to the splice length and slice it in the middle.	3. Put the sleeve around the splice and close it.	4. Put the belt with the sleeve into the HP01 mould and weld it with the HP01 hotpress.	5. Upon completion of the welding process open the press and remove the profile.

1. General welding with Hotpress HP01 (bluepower profile)

1. Insert the profile into the mold.	2. Close top of the mold and put it in the press.	3. Turn the knob and close the press.	4. Select the menu and press the start button.	5. Upon completion of the welding process open the press and remove the profile.

2. Overlap welding with the Hotpress HP01 (Round belts with reinforcement)

1. Cut both belt ends angular and remove approx. 5mm of the front part of the reinforcement.	2. Insert the profile into the mold and clamp sidewise.	3. Close top of the mold and put it in the press.	4. Turn the knob and close the press.	5. Select the menu and press the start button.

Hotpress HP01: