|
Moulds and accessories HP01 Hotpress:
|
Related items: |
|
For our BEHAbelt HP01 Hotpress we offer a wide range of accessories that make it even more flexible and easy to use. Order the accessories that perfectly fit and complement your application!
|
Delivery Programme 2013 |
|
| Product overview 2013 |
|
| Hotpress HP01 |
|
| Video HP01 Instruction manual |
|
| |
|
| Item |
Picture |
Description |
Download |
|
Standard mould for PU and TPE
Round- and V-belts
Order No. per diameter: see download
Special moulds upon request!
|
|
Standard moulds for round- and V-belts
|
|
Moulds for PU timing belts
Order No. per size: see download
Service punch for making finger punches of timing belts with aramid and steel reinforcement available upon request!
|
 |
Moulds for PU timing belts
|
|
|
Belt cutter for reinforced profiles
Order No. FBWSH1
Designed to accurately cut and prepare reinforced profiles for overlap welding with the BEHAbelt HP01 hotpress.
|
|
Belt cutter for reinforced profiles
|
|
|
|
|
|
|
Before overlap welding
|
After overlap welding
|
Profile adapters
|
 |
 |
  |
|
|
For round belts for Bluepower for V-belts |
|
|
|
Shaft for HP01 to use with torque wrench
|
|
Shaft for holding a torque wrench which is used to set the exact required welding pressure with a dynamometric key in a way that can accurately be repeated every time.
|
|
|
|
|
|
Order No. FBWHPSD12 wrench size 12
|
For further information, please click on the following link: 
|
|
Joining set RH-2 for belts with steel reinforcement
|
|
Scope of delivery:
- 1 pc. carrying bag
- 1 pc. crimping tool RH-2
- 30 pcs. Polyester sleeves à 8 cm
- 100 pcs. AL crimps
Order No.: FBWZRH2SET1
For further information, please click on the following link:
|
 |
 |
 |
 |
 |
 |
1.
Join the steel reinforcement with crimps and crimp them with the crimping tool. |
2.
Cut the length of the Polyester sleeve according to the splice length and slice it in the middle.
|
3.
Put the sleeve around the splice and close it.
|
4.
Put the belt with the sleeve into the HP01 mould and weld it with the HP01 hotpress.
|
5.
Upon completion of the welding process open the press and remove the profile.
|
|
|
|
|
|
|
