|
|
Fitting connectors
|
|
Related items: |
|
Recommendation:
Hollow round belts should be welded just like solid belts. In the case of a breakdown, fitting connectors can be used for a quick repair, until the belt can be welded once again. Another advantage is the flexibility of the belt for little pulley diameters. Mostly fitting connectors are sufficient for light transport applications and are often used in the field.
|
|
Delivery Programme 2013 EN |
|
|
Product overview 2013 EN |
|
|
Joining tools |
|
|
Paddle welding |
 |
|
Hollow round belts |
|
Fitting connectors for quick repairs
|
|
The belts with diameters of 4,8 – 6,3 – 8 – 9,5 – 12,5 – 15 mm in the qualities PU 75 A, PU 85 A and PU 90 A are also available as hollow belts, shaped as tubes with a defined small hole and a strong wall.
They can be connected via metal connectors, as shown in the picture above. For a high number of drive and conveyor problems, when the belts are not subject to heavy loads or high speed, this type of joining represents a good alternative to the welded joint. (Make sure the minimum pulley diameter and the pulley form are correct).
When applying the metal nipple, special care has to be taken not to damage the sharp edges. This would restrict the tensile strength of the joint. Therefore we recommend the use of pointed pliers.
Attention: Wear gloves, risk of injury!
|
|
 |
|
Order No. |
Diameter Ø |
| mm |
inch
|
| FBN048 |
4,8 |
3/16 |
| FBN063 |
6,3 |
1/4 |
| FBN080 |
8,0 |
5/16 |
| FBN095 |
9,5 |
3/8 |
| FBN0125 |
12,5 |
1/2 |
| FBN0125 |
15,0 |
19/32 |
|
BEHAbelt Pliers SZ01 for quick joining of hollow round belts with fasteners:
Description: Order No.:
Pliers SZ01 FBWSZ01
For further information, please click on the following link:  |
|
|
