Introducing The Jewel Friction Welder RS02:

Eliminate Downtime with a Perfect Splice every time

• Precise Pressure and automatically 0- position prevents uneven welds and premature failure.
• Automatic alignment ensures that 100% of the belt ends are fused.
• Temperature variation is never a concern. No guesswork.

Eliminate the variables that cause costly surprises

With heated paddles, there are 3 variables that can lead to faulty, costly splices. Many of these errors are undetectable to the naked eye — there is often no way to spot a faulty splice until it breaks.

1. Wrong or inconsistent pressure applied by hand can create uneven welds. Too much pressure and molten material is pushed out the sides, resulting in a weak connection at the middle of the belt ends. Too little pressure and bonding is uneven, resulting in soft spots for a weak connection.

2. Misalignment of belt ends can cause weak joints as less than 100% of the belt ends are fused.

3. Guesswork on the temperature of the paddle can cause uncertainty. Did enough material melt to create a solid splice? Is the temperature the same over time or has the device lost its ability to generate consistent heat?

The Jewel eliminates all these variables and the guesswork that can lead to a faulty splice.

Perfection in less than a minute

The Jewel can greatly increase productivity for installations requiring frequent belt replacement. From clamp to cleanup, a belt can be spliced and online in only a few minutes. In one case, six splices were accomplished in less than 10 minutes—a job that used to take an hour or more each day.

The Jewel system includes:

• Friction welding instrument
• 1 Set of standard size round and V-shaped profile jaws
• 1 Clamp adjustment key tool
• 1 Carrying bag
• 1 Edge cutter and scissors

Additional standard profile jaws are available on surcharge to match virtually any size Round or V-shaped Polyurethane belt. Profile jaws for special belts on inquiry.