BEHAbelt - Joining tools and Accesories

close

News

Sub Menu

Useful

BEHAbelt Newsletter

BEHAbelt RSS Feed

Print

E-mail

Tools and Accesories

Tools and Accesories:		Related items:
Every belt is only as good as his joining. Therefore we offer a great variety of Wedlings instruments and - tools to come along with the BEHAbelt profiles.		Delivery Programme 2010 EN
		Product Overview 2010 EN
		Joining Tools
		Friction Welder RS02
		Welding Tools


1. Welding with welding paddle Multi TC, SG02 or SG03

1. Warm up the paddle on the required temperature.	2. Apply clamps to the belt ends and align the belt ends central.	3. Insert the welding paddle between the belt ends and press the guide clamp together.	4. If a bead of approx. 2-3mm appears at the belt ends open the guide clamp quick and take the paddle out.	5. Press the guide clamp together, fasten it and leave the profile approx. 10min to cool down.

2. Welding with Friction Welding Machine RS02

1. Select and use clamping jaws.	2. Put the profile in the middle of the clamping jaws and fasten the clamping jaws with the Allen key.	3. Set the contact pressure and speed regulation depending on the size of the profile.	4. Switch the machine on and press the release button key while the welding process is running.	5. Switch off as soon as the profile is swelling and keep the spliced profile about 2-3min fixed on the machine before you take the profile out.

3. Welding with Hotpress HP01

1. Insert the profile into the mold.	2. Close top of the mold and put it in the press.	3. Turn the knob and close the press.	4. Press the start button.	5. Upon completion of the welding process open the press and remove the profile.

4. Overlap welding with FZ03

1. Select the clamping piece lockers and clamping pieces and insert into the FZ03.	2. Cut belt ends according to the Z-shape of the welding paddle to the desired length and insert them overlapping into the FZ003.	3. Melt the profile with the Z-shaped welding paddle.	4. Remove the welding tool very fast and close the FZ03 again.	5. Remain the profile within the guide clamp to cool down. Remove the excess welding remains with the SE02 edge cutter.